The group_info field of an XkbSymMapRec is an encoded value containing the number of groups of symbols bound to the key as well as the specification of the treatment of out-of-range groups. It is legal for a key to have zero groups, in which case it also has zero symbols and all events from that key yield NoSymbol. To obtain the number of groups of symbols bound to the key, use XkbKeyNumGroups. To change the number of groups bound to a key, use XkbChangeTypesOfKey. To obtain a mask that determines the treatment of out-of-range groups, use XkbKeyGroupInfo and XkbOutOfRangeGroupInfo.
The keyboard controls contain a groups_wrap field specifying the handling of illegal groups on a global basis. That is, when the user performs an action causing the effective group to go out of the legal range, the groups_wrap field specifies how to normalize the effective keyboard group to a group that is legal for the keyboard as a whole, but there is no guarantee that the normalized group will be within the range of legal groups for any individual key. The per-key group_info field specifies how a key treats a legal effective group if the key does not have a type specified for the group of concern. For example, the Enter key usually has just one group defined. If the user performs an action causing the global keyboard group to change to Group2, the group_info field for the Enter key describes how to handle this situation.
Out-of-range groups for individual keys are mapped to a legal group using the same options as are used for the overall keyboard group. The particular type of mapping used is controlled by the bits set in the group_info flag, as shown in Table 1.
| Table 1 group_info Range Normalization |
| Bits set in group_info Normalization method |
| XkbRedirectIntoRange XkbRedirectIntoRange |
| XkbClampIntoRange XkbClampIntoRange |
| none of the above XkbWrapIntoRange |
Boolean Controls. Boolean Controls can be turned on or off under program control and can also be automatically set to an on or off condition when a client program exits. The remaining controls, known as the Non-Boolean Controls, are always active. The XkbControlsRec structure describes the current state of most of the global controls and the attributes effecting the behavior of each of these Xkb features. This chapter describes the Xkb controls and how to manipulate them.
There are two possible components for each of the Boolean Controls: attributes describing how the control should work, and a state describing whether the behavior as a whole is enabled or disabled. The attributes and state for most of these controls are held in the XkbControlsRec structure.
You can manipulate the Xkb controls individually, via convenience functions, or as a whole. To treat them as a group, modify an XkbControlsRec structure to describe all of the changes to be made, and then pass that structure and appropriate flags to an Xkb library function, or use a XkbControlsChangesRec to reduce network traffic. When using a convenience function to manipulate one control individually, you do not use an XkbControlsRec structure directly.
The Xkb controls are grouped as shown in Table 2.
| Table 2 Xkb Keyboard Controls | |
| Type of Control Control Name Boolean Control? | |
| Controls for enabling and disabling other controls | EnabledControls No |
| AutoReset No | |
| Control for bell behavior | AudibleBell Boolean |
| Controls for repeat key behavior | PerKeyRepeat No |
| RepeatKeys Boolean | |
| DetectableAutorepeat Boolean | |
| Controls for keyboard overlays | Overlay1 Boolean |
| Overlay2 Boolean | |
| Controls for using the mouse from the keyboard | MouseKeys Boolean |
| MouseKeysAccel Boolean | |
| Controls for better keyboard access by | AccessXFeedback Boolean |
| physically impaired persons | AccessXKeys Boolean |
| AccessXTimeout Boolean | |
| BounceKeys Boolean | |
| SlowKeys Boolean | |
| StickyKeys Boolean | |
| Controls for general keyboard mapping | GroupsWrap No |
| IgnoreGroupLock Boolean | |
| IgnoreLockMods No | |
| InternalMods No |
The individual categories and controls are described first, together with functions for manipulating them.
The KeySymMapRec structure
is defined as follows:
#define XkbNumKbdGroups 4
#define XkbMaxKbdGroup (XkbNumKbdGroups-1)
typedef struct { /* map to keysyms for a single
keycode
*/
unsigned char kt_index[XkbNumKbdGroups]; /* key type index
for
each group */
unsigned char group_info; /* # of groups and out of range
group
handling */
unsigned char width; /* max # of shift levels for key
*/
unsigned short offset; /* index to keysym table in syms
array
*/
} XkbSymMapRec, *XkbSymMapPtr;
The XkbControlsRec structure is defined as follows:
#define XkbMaxLegalKeyCode 255
#define XkbPerKeyBitArraySize ((XkbMaxLegalKeyCode+1)/8)
typedef struct {
unsigned char mk_dflt_btn; /* default button for keyboard
driven
mouse */
unsigned char num_groups; /* number of keyboard groups
*/
unsigned char groups_wrap; /* how to wrap out-of-bounds groups
*/
XkbModsRec internal; /* defines server internal modifiers
*/
XkbModsRec ignore_lock; /* modifiers to ignore when checking
for grab */
unsigned int enabled_ctrls; /* 1 bit => corresponding boolean
control enabled */
unsigned short repeat_delay; /* ms delay until first repeat
*/
unsigned short repeat_interval; /* ms delay between repeats */
unsigned short slow_keys_delay; /* ms minimum time key must be
down to
be ok */
unsigned short debounce_delay; /* ms delay before key reactivated
*/
unsigned short mk_delay; /* ms delay to second mouse motion
event */
unsigned short mk_interval; /* ms delay between repeat mouse
events */
unsigned short mk_time_to_max; /* # intervals until constant
mouse
move */
unsigned short mk_max_speed; /* multiplier for maximum mouse
speed
*/
short mk_curve; /* determines mouse move curve
type */
unsigned short ax_options; /* 1 bit => Access X option enabled
*/
unsigned short ax_timeout; /* seconds until Access X disabled
*/
unsigned short axt_opts_mask; /* 1 bit => options to reset on
Access
X timeout */
unsigned short axt_opts_values; /* 1 bit => turn option on, 0=>
off */
unsigned int axt_ctrls_mask; /* which bits in enabled_ctrls
to
modify */
unsigned int axt_ctrls_values; /* values for new bits in
enabled_ctrls */
unsigned char per_key_repeat[XkbPerKeyBitArraySize]; /* per
key auto
repeat */
} XkbControlsRec, *XkbControlsPtr;
The XkbControlsRec structure is defined as follows:
#define XkbMaxLegalKeyCode 255
#define XkbPerKeyBitArraySize ((XkbMaxLegalKeyCode+1)/8)
typedef struct {
unsigned char mk_dflt_btn; /* default button for keyboard
driven
mouse */
unsigned char num_groups; /* number of keyboard groups
*/
unsigned char groups_wrap; /* how to wrap out-of-bounds groups
*/
XkbModsRec internal; /* defines server internal modifiers
*/
XkbModsRec ignore_lock; /* modifiers to ignore when checking
for grab */
unsigned int enabled_ctrls; /* 1 bit => corresponding boolean
control enabled */
unsigned short repeat_delay; /* ms delay until first repeat
*/
unsigned short repeat_interval; /* ms delay between repeats */
unsigned short slow_keys_delay; /* ms minimum time key must be
down to
be ok */
unsigned short debounce_delay; /* ms delay before key reactivated
*/
unsigned short mk_delay; /* ms delay to second mouse motion
event */
unsigned short mk_interval; /* ms delay between repeat mouse
events */
unsigned short mk_time_to_max; /* # intervals until constant
mouse
move */
unsigned short mk_max_speed; /* multiplier for maximum mouse
speed
*/
short mk_curve; /* determines mouse move curve
type */
unsigned short ax_options; /* 1 bit => Access X option enabled
*/
unsigned short ax_timeout; /* seconds until Access X disabled
*/
unsigned short axt_opts_mask; /* 1 bit => options to reset on
Access
X timeout */
unsigned short axt_opts_values; /* 1 bit => turn option on, 0=>
off */
unsigned int axt_ctrls_mask; /* which bits in enabled_ctrls
to
modify */
unsigned int axt_ctrls_values; /* values for new bits in
enabled_ctrls */
unsigned char per_key_repeat[XkbPerKeyBitArraySize]; /* per
key auto
repeat */
} XkbControlsRec, *XkbControlsPtr;